Kurslar

Arduino

Today I’ll be working with a BIG stepper motor. I'll show you how to use a microstep driver module and an Arduino to drive a NEMA 23 size motor. Article with code: https://dronebotworkshop.com/big-stepper-motors/ More articles and tutorials: https://dronebotworkshop.com Join the conversation on the forum: https://forum.dronebotworkshop.com Subscribe to the newsletter and stay in touch: https://dronebotworkshop.com/subscribe/ Today we will work with a bigger motor than the ones used in the original stepper motor video. This motor is a NEMA 23 size beast that takes up to 4.2 amperes per coil, more than we can drive using the drivers and H-Bridges we used earlier. To drive this motor I'll be using a microstep module, a common device available on eBay, at Amazon, and at your local electronic and electrical supply store. The module I used is a model MA860H but the wiring and coding will work for any one of these modules. In order to select a module suitable for your stepper motor you will need to know how to read and interpret some of the stepper motor specifications, so I’ll cover that. One spec that fools a lot of people is the voltage rating, I'll explain why the number in the

Pulsuz12 dərs2 saat 53 dəqBaşlanğıc

Rafał Iwanek kanalı

avqust 2021

15 gün əvvəl yoxlanılıb

Nə öyrənəcəksən

  • Big Stepper Motors with Arduino
  • TinkerCAD Tutorial - Using the Arduino with CodeBlocks
  • Jak z pomocą Arduino uratować paprotkę od zagłady?
  • Kurs Arduino : Programowanie - Podstawy języka Arduino cz. (C/C++
  • Kurs Arduino : Wstęp - Jak zacząć przygodę z Arduino (od podstaw
  • Kurs Arduino : Silniki krokowe - Podłączenie i obsługa + sterownik A4988
  • Arduino Grbl CNC (Homing
  • First DIY CNC build (Part ) - Figuring out the ELECTRONICS - Arduino Genuino UNO GRBL

Kursun öz dərslərindən, müəllifin sözləri ilə.

Pulsuz

Kurs pulsuzdur və YouTube-da dərc olunub. Müəllifi kanalın özüdür, biz yalnız düzürük və videoların açıldığını yoxlayırıq.

Kursa başla
Paylaş

Əlaqəli mövzular

Kursa daxildir

  • 2 saat 53 dəq video
  • 12 dərs
  • Səviyyə: Başlanğıc
  • Dil: English
  • Harada dayandığını yadda saxlayırıq
  • Tam pulsuz, kartsız

Dərslər

2 bölmə · 12 dərs · 2 saat 53 dəq ümumi uzunluq

1–10 dərslər10 dərs · 2 saat 36 dəq
11–12 dərslər2 dərs · 17 dəq

Nə lazımdır

  • Öncədən təcrübə lazım deyil: kurs sıfırdan başlayır.

Təsvir

Today I’ll be working with a BIG stepper motor. I'll show you how to use a microstep driver module and an Arduino to drive a NEMA 23 size motor. Article with code: https://dronebotworkshop.com/big-stepper-motors/ More articles and tutorials: https://dronebotworkshop.com Join the conversation on the forum: https://forum.dronebotworkshop.com Subscribe to the newsletter and stay in touch: https://dronebotworkshop.com/subscribe/ Today we will work with a bigger motor than the ones used in the original stepper motor video. This motor is a NEMA 23 size beast that takes up to 4.2 amperes per coil, more than we can drive using the drivers and H-Bridges we used earlier. To drive this motor I'll be using a microstep module, a common device available on eBay, at Amazon, and at your local electronic and electrical supply store. The module I used is a model MA860H but the wiring and coding will work for any one of these modules. In order to select a module suitable for your stepper motor you will need to know how to read and interpret some of the stepper motor specifications, so I’ll cover that. One spec that fools a lot of people is the voltage rating, I'll explain why the number in the

Bu kurs kimin üçündür

  • Mühəndislik sıfırdan başlayanlar üçün.

Bu iki bənd kursun səviyyəsindən çıxardığımız nəticədir. Təsvir müəllifindir.

Arduino, Rafał Iwanek kanalı